Brick Repair Dallas
Services by *Alamo Masonry
Brick Repair Dallas
Brick Repair Guide - This is the best and most complete do it yourself guide to brick repair. It will help you to locate replacement bricks if needed, determine which materials are needed, how to match your mortar, and more.
SEO Book -
Dallas Brick Repair Services by
Get affordable brick repair, done right.
Dallas Brick Repair Services
How Much Does Brick Repair Cost In Dallas?
Click here to view our Price Sheet.
This is the most common question we are asked. In order to answer this question, we must tell you a little about masonry repair.
When preparing to repair masonry mortars and cracks, the mortar used for repair must match the original mortar. While this sounds easy enough, it is far more challenging than you might expect. Matching to an original mortar can only be done through extensive mortar testing performed by a qualified mortar testing lab. The testing lab must be able to test hardened mortars to determine their composition and mortar type. If the mortar type is not matched, the new mortar can cause further damage or not bond into the mortar joints of your wall.
This is why the official guidelines of masonry restoration specify the need for mortar analysis and matching, and that it is done through compliance with certain ASTM testing standards.
As these are the regulated guidelines of the industry, they would carry over into inclusion with the sale of any repaired property. Should a repair be performed that doesn't properly match and/or without the report from a testing lab specifying an appropriate repair mortar, the seller of such a property could likely be forced to re-purchase the property.
For all of these reasons, mortar testing is required before any repair can be performed to the masonry. You will notice the AMR Mortar Testing Labs logo proudly displayed on our site as they provide the most complete analysis and most usable information of any testing lab we have used.
The cost of mortar analysis is $350.00 and then the color match is $150.00 (Color Match by AMR is Optional) making a total of $500.00 for the tests alone.
AMR Labs produces bags of custom mortar at a cost of $70.00 per box. The average repair project uses 2 boxes of custom mortar. If your project is small, you are looking at an additional $140.00 for 2 boxes of mortar. Then, we finally get to our own mobilization, labor, and other charges.
In most cases, we can quote a price from pictures of the areas to be repaired and a few project details. (Please tell us: Is the home single story/two story, about how many cracks, are any cracks wider than a pencil, are any brick broken, and do you have replacement brick if needed.)
Be sure to include these details, pictures, and contact information (Name, Job Address, Phone) and send it to us at email@example.com
Be sure to click send/receive in your email client to ensure prompt delivery.
Masonry tuckpointing is the process of pointing or repointing the mortar between the brick, block, or stone of a masonry structure or veneer. It typically requires removing some of the old mortar from the mortar joints before masonry repointing can be performed. This is due to the ability of mortars to get a proper bond. Bonding requires about 3/4 of an inch depth and a clean moist surface to get the best bond.
Alamo Masonry specializes in brick repointing and was among the first companies to specialize in repointing brickwork. Brick pointing or tuckpointing brick requires attention to detail, and knowledge of how the original work went together.
We also specialize in house foundation repairs. This combination of our specialties provides us with a better understanding of what is causing your brick mortar to crack, and allows us to fix the cause of the cracking and repair the cracked mortar joints and broken bricks.
Our experience in new construction of these projects is very helpful in being able to repair them safely and properly, and the little details make big differences. Even a change in the gradation of the sand will change the appearance and crushing pressure of the mortar.
At Alamo Masonry, we focus on the details. Each projects original mortar is tested and examined so as to get a more perfect match because repairs don't have to look like repairs, and a proper repair should not even be able to be found. We match your mortar's color, crushing pressure, texture, tooling, and the color and gradation of the sand as accurately as possible.
In order to do this, Alamo Masonry Repair developed a testing facility and mobile testing labs for our trucks. Each truck is rigged out with everything needed to test and match mortars, and to produce AMR mortar repair products. AMR Mortars are the only mortars made specifically for repair and repointing mortar joints.
AMR Mortars are the only mortars available that allow you to make smaller volumes of mortar in the various tones and colors needed for any mortar match and are available in any mortar type.
For mortar matching services call Mortar Lab
AMR Mortar Testing Lab Click here
We are making brick mortar cracks disappear. - AMR
Brick Repair Dallas
Is your Brick or
Masonry Siding Cracked or Damaged?
1. Water Damage – Repairing the brick around your home protects your home against water flowing through available openings in your brick veneer.
2. Falling Objects – Falling brick could cause serious injury or death, opening you up to major liability. Falling brick archways are a prime example of this.
3. Property Value – Proper Brick Repair restores the value and beauty of your home.
4. Excessive Heating/Cooling Costs – Brick Repair helps to keep utility costs to a minimum.
5. Pests – Protect your home and family from various infestations. Animals and insects tend to find cracks in your brick home appealing, because they are warm in the winter and cool in the summer. If you have such cracks in your brick, be cautious of possible infestations. They will find a means of entry. Some of the most common are:
Many of the above pests, once inside the brick, will spread throughout your home. .
All of these concerns can be resolved by having the experts at Alamo Masonry repair the cracked or damaged brick and mortar around your masonry home.
Alamo Masonry Specializes in brick repair and foundation repair. This is because of how these two fields are related. In order to specialize in Brick Repair, we have to fully understand the cause of the cracks in brick and mortar joints. Most of the time, the cracks in the brick mortar are a result of the foundation settling, and in order to properly repair your home and fix the cracks in the brick mortar, you may need to stabilize and fix your house foundation.
Most foundation repairs are localized to certain areas of the home, but can be all around the house foundation. We take the time to determine if there are major concerns with your foundation and if it may need foundation repair before the brick are repaired.
Many brick repairs can be completed without installing foundation piers, but each project has to be analyzed to determine this detail. Generally, if the cracks are small, they can be repaired, but may require an expansion control joint to arrest the movement's potential to damage the brick mortar.
We can generally gather enough information from you over the phone and sometimes by email to determine if the repairs are likely to require foundation piers, but will still perform an on site inspection to confirm the repairs and the costs of repairs before the project is completed. Some inspections may cost, but are applied to the contract if accepted.
Alamo Masonry -- Brick and Foundation Repair provides local services in the Dallas-Fort Worth area of Texas.
For more information aboutPre-Matched Mortars click here.
Did you know that most re-cracking and other brick damage are related to the mortar used not the movement of your foundation. This is why we use only AMR Mortars. They are the best mortars available on the market and are made specifically for brick mortar repair.
OR Learn More About Our Do-It-Yourself Brick Repair Options
You can save hundreds of dollars using AMR Pre-Matched Mortars. Pre-Matched Mortars make Brick Repair easy and affordable. AMR does the hard part for you. AMR analyzes and matches the mortar type and color. All you need to do is inject it into the mortar joints and tool it. It's that easy.
Order Pre-Matched Mortars and a Certified Mortar Match